Because life’s celebrations shouldn’t cost the Earth

Thursday, 25 May 2017

Zipper End Tab Tutorial

How to cover zip ends ~ An easy DIY!



It's been absolutely ages since I lasted posted a tutorial, so without any further fuss here's a new one ~ Demonstrating how to create the little tabs covering zipper ends of bags and pouches.  They're such a cute little design feature, adding a pop of colour and a fabulous professional feel to your finished makes. 

So that you could see the difference they make for yourself, I began by stitching up an example pouch without tabs......


Just look how pinched and puckered the bulky zipper teeth make those poor side seams....



Now doesn't that look better?!

Tutorial

The first thing you'll notice about this tutorial is that I'm not one for lots of complicated measuring.....I'd much rather get on with the actual sewing and then cut off the 'extra' bits later!  This makes the whole process sew much quicker and easier 😀

To begin, firstly cut two strips of fabric just a touch wider than your zip and approximately twice the finished length of the tabs (I think about 1½ cm looks perfect) plus an extra 5 or 6 centimetres ~ See I promised no real measuring was needed!

Now cut your zipper so that it is roughly 4½ cm shorter than your pouch side pieces.  This also allows you to lose those metal 'staples' from the ends of your zipper, sewing machines needles do not come off best in a fight against them (guess how I know that!).  You could also sew the zip ends closed with a couple of hand stitches, I don't bother but I guess there is a slight risk you might lose the zipper pull off one or other of the open ends! 


Next fold under approximately 1 cm on each end of your fabric strips press, then fold in half and press again.  From now on the fabric strips will simply be referred to as tabs.

Place one zipper end just inside the first folded tab and hand tack into position.  The less zip you have within the tab the better, as the whole point of the exercise is to reduce unnecessary excess, thus eliminating the annoying puckering that comes from those bulky zipper teeth.

Machine stitch into place and repeat with the other zipper end, you'll then be left with the ends looking like this;


Now continue constructing your pouch in the usual manner......


....and once you've stitched your zipper pouch sandwich, simply trim off the excess tab fabric 


Looking good!


There you have it, a quick and easy guide to creating zipper tabs,
I told you it was easy!


For the pouch above I chose to stitch the tabs in a high contrast fabric for a very modern effect, but they also look great in matching fabric;



In the pouch below I made the tabs an absolutely integral design feature of the finished item... 


Pretty cute huh?


See More SewforSoul zipper pouches here


Tuesday, 9 May 2017

'Big Top' Applique Circus Bag

Embroidered Circus Tent Sack



May's issue of Sewing World Magazine is available in shops now and it's packed full of lots of lovely projects just waiting to be stitched, including my 'Big Top' Toy Sack.

Leanne, the magazine's editor, asked me to design a drawstring bag which pulled up to create the vaulted top of a circus tent!


It has a fantastic retro vibe going on (not least because we no longer expect animals to be used as a source of amusement and fun!) and the nice and roomy size means it can easily swallow absolutely loads of toys or a full PE kit.


As usual I used my favourite freemotion machine embroidery and raw edge applique techniques.  I just love the way the 'doodled' black stitching really brings the pictures to life  ~ Take look at that cute monkey!


We also have a baby elephant...


 ..and a very talented seal

 


Happy Stitching!